Click image to view full size image
Product details
BRTP06ISS0PC series applies to all types of horizontal injection machines of 30T-150T for take-out products. The up and down arm is a single sectional type. The upper and lower part, drawing part, screwing out, and screwing in of BRTP06ISS0PC is driven by air pressure, with high speed and high efficiency; After installing this robot, productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.
Main Specification
| Power Source(KVA) | Recommendedl.M.M (ton) | Traverser Driven | Model of EOAT |
| 0.05 | 30T-150T | Cylinder drive | Zero suctions zero fixtures |
| Traverser Stroke (mm) | Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
| / | 120 | 650 | 2 |
| Dry Take Out Time (sec) | Dry Cycle Time (sec) | Swing Angle (degree) | Air Consumption (NI/cycle) |
| 1.6 | 5.5 | 3 | |
| Net Weight(KG) | |||
| 36 |
Model representation: I: Single cut type. W: Telescopic type. S: Product arm. S0: Driven by cylinder (Traverse-axis).
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
| A | B | C | D | E |
| 1372 | 1225 | 530 | 316 | 881 |
| F | G | H | I | J |
| 619 | 50 | 440 | 225 | 45° |
| K | ||||
| 90° |
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
http://www.b1brobot.com/